DOMESTIC RANGE

---

Heating only heat pump integrating the Geo-Cooling and Domestic Hot Water function as standard. GeoCIATTM Access connects to vertical or horizontal sensors or groundwater thanks to the intermediate ITEX AGEO exchanger.

New geothermal heat pump for new houses  

Available in 1 single phase 230 V model

Heating capacity of 4.7 kW at 0/-3°C 30/35°C  

Cooling capacity of 6.12 kW at 10/7°C 30/35°C

Designed for low energy houses, GeoCIATTM Access integrates all the components needed for the installation.  

It can be connected to emitters such as underfloor heating systems, comfort units (fan coil units, DIVIO dynamic radiators) or radiators.

• Comprehensive packaged unit. 
• Geo-Cooling as standard. 
• Hydraulic module with class A variable speed accelerator pumps and expansion vessel. 
• Easy to remove casing (full access from the front). 
• Scroll R410A compressor. 
• Brazed plates exchanger 
• DHW valve integrated as standard (300 litre DHW tank optional). 
• HomeConnect control with remote control station (remote I/O Homecontrol protocol) 
• Electronic expansion valve

• Reversible packaged Air/Water heat pump 
• Full Inverter Technology with large operating run 
• Hydraulic module with variable speed accelerator pump and expansion vessel 
• Control on ‘ Water ‘ or ‘  Inside Air’ 
• Management backup heater in several stages 
• Master / slave operation 
• Management Sanitary Hot water with anti-legionella function 
• Noise reduction without ‘ Night Mode ‘ function

6 models available

Cooling capacity : 4 to 17 kW 

Heating capacity : 5 to 15 kW

Packed reversible Air / Water heat pump with inverter technology for heating and cooling  individual Houses or small sector premises. EREBA He can be installed in individual new Houses connected to low temperature emitters ( underfloor heating & cooling systems ; hydronic terminal as fan coil ) or as  boiler backup in existing Houses.

> Advantages:  

• Complete and intuitive control for new and existing housing 
• Integrated hydraulic module for easy installation 
• Extensive operating range to answer heating and DHW needs all year round

The EREBA air-to-water heat pump is designed for heating and cooling applications in new, existing individual homes and small businesses models. When installed alone, EREBA is compatible with low to medium temperature emitters (underfloor heating, fan coil units, water cassettes, radiators, mixed installations, etc.). EREBA is also compatible with medium to high temperature emitters for boiler backup operation. The EREBA heat pump is installed outside in an open area, ideally as close as possible to the boiler room. Each device is tested in the factory and delivered ready for operation

7 models available

Heating capacity : 4 to 15 kW  

Cooling capacity : 5 to 16 kW

Packed reversible air/water heat pump with technology Inverter for heating and cooling individual homes or small service sector premises. EREBA can be installed in individual new build housing connected to low temperature emitters (underfloor heating and cooling systems, fan coil type terminal units) or as boiler backup in existing homes.

• Reversible packaged air/water heat pump 
• DC Inverter technology 
• Hydraulic module with variable speed accelerator pump and expansion vessel 
• Crankcase heater as standard, 
• Self-adjusting functions 
• R410A refrigerant

• Split air/water heat pump 
• DC Inverter technology 
• Integrates electric back up, buffering capacity, expansion vessel 
• Crankcase heater as standard, 
• Self-adjusting functions 
• R410A refrigerant 
• Remote control terminal with quick access to main functions 
• Complete installation and quick start up thanks to the split configuration and pre-configured water laws 
• DHW option for dual service operation 
• Cooling mode available for all models

6 models available

Heating capacity : 5 to 15 kW  

Cooling capacity : 13 to 16 kW

Split air/water heat pump with Inverter technology for heating individual housing or small service sector premises. Yuna II can be installed in new housing connected to one or two networks of low or medium temperature emitters (underfloor heating and cooling systems, fan coil type terminal units) and supply a domestic hot water heater (option).

• Wide operating range in both heating and cooling mode offers high performance in a wide temperature range. 
• DC inverter twin-rotary compressors with Pulse Amplitude Modulation (PAM) and Pulse Width Modulation (PWM) provide enhanced reliability, low energy consumption and smooth vibration-free operation under all operating conditions. 
• Variable-speed fans with an innovative patented fan blade shape ensure improved air distribution at exceptionally low noise levels. 
• Pre-set or customised selection of the appropriate climate curve for stable output capacity to match the heat load. 
• Output to link and integrate the unit with the existing heat  sources offers a dual-energy approach, increased savings and optimum comfort in all weather conditions. 
• Able to control two independent comfort zones with a two‑zone kit added to the main comfort module. 
• Leaving water temperature up to 60 °C for radiator and domestic hot water applications, making hot water readily available.

GeoCIATTM Power integrates all the hydraulic components on the loop and emitter sides. It can be connected to underfloor heating and cooling system type emitters, comfort units (fan coil units, water cassettes) or low-temperature radiators.

Available in 5 models including one 1-ph version

Heating capacity from 12.5 to 27 kW at 0/-3°C 30/35°C  

Heating capacity from 16.5 to 38 kW at 10/7°C 30/35°C

Heat pump (used for heating only) on horizontal or vertical sensor (using ground water as an option) for heating individual homes or small businesses. Passive cooling optional (Geo-cooling option).

• Heating capacity from 12.5 to 27 kW at 0/-3°C 30/35°C 
• Heating capacity from 16.5 to 38 kW at 10/7°C 30/35°C

The EREBA air-to-water heat pump is designed for heating and cooling applications in new, existing individual homes and small businesses models. When installed alone, EREBA is compatible with low to medium temperature emitters (underfloor heating, fan coil units, water cassettes, radiators, mixed installations, etc.). EREBA is also compatible with medium to high temperature emitters for boiler backup operation. The EREBA heat pump is installed outside in an open area, ideally as close as possible to the boiler room. Each device is tested in the factory and delivered ready for operation.

Three-phase reversible heat pump  

2 models available, sizes 17 and 21

Three-phase reversible heat pump  

2 models available, sizes 17 and 21

EREBA is a range of Air/Water packaged reversible heat pumps designed for new or existing installations:  

• New or renovated single family homes as back up operation 
• Small business premises. 

With a maximum heating temperature of 60°C (57°C for size 21), these heat pumps can be connected to all types of emitter: radiators, fan coil units or underfloor heating systems. EREBA range is designed to be installed outdoors

• R410A refrigerant 
• Complete integrated hydraulic module: variable speed accelerator pump, 8L expansion tank, screen filter, safety valve 
• Installation in series up to 4 units 
• INVERTER Twin Rotary DC compressor 
• Superior frost protection with integrated electric heat trace cable 
• WUI remote control terminal supplied as standard 
• Communication with CMS using Modbus protocol or control via potential-free (dry) contacts 
• Eurovent certification