ROOF TOP PACKAGED UNITS

---

The VECTIOS POWER  R-454B range are compact, horizontal and autonomous air to air units, rooftop-type design, with high efficiency (3% higher than the already outstanding efficiency in VECTIOS POWER R-410A) and 80% lower direct CO2 footprint thanks to the use of the new refrigerant R-454B. They are equipped with all the components required for the correct air conditioning to the installation. 

•IPJ series: Units for reversible heat pump operation

Cooling capacity from 98 to 273kW 

Heating capacity from 97 to 300kW 

Airflow from 10 800 to 54 000 m3/h

The unit is connected directly to an air distribution ductwork without additional elements or equipment, pipes, cables, etc. taking up no floor space at all. This design reduces the cost of installation, facilities connections and ensures reliable operation. The range of capacities of these units allows for the air conditioning of large surface areas.  

A vast number of options meet many operating requirements, such a: 

•Recovery of the extracted air energy 

•Free-cooling 

•Air renewal 

•Zoning with variation of air flow 

•Indoor air quality control 

•Air filtration 

•Auxiliary devices for heating 

•Heat recovery coil •Extension of operating limits 

•Available static pressure up to 80 mm.w.c. All of the units are tested and checked in the factory.

• Ecodesign compliant Lot 21 Tier 2 (2021) 
• 4 hermetic scroll-type compressors in tandem design 
• 2 frigorific circuits 
• Plug-fans (free-wheel) with EC motors 
• Electronic Expansion Valves 
• R-454B non-depleting refrigerant & low GWP (-77% lower GWP than R-410A and -31% than R-32). 
• R-454B refrigerant is classified as A2L 
• High flexibility with a large number of available options 
• Optional double skin panel 50mm insulation in the entire indoor section in contact with airflow 
• Folding hood cover for transport 
• Aluminum panels and registers 
• Dual locking system of a high quality

HIGH ENERGY EFFICIENCY AND ENVIRONMENTAL RESPONSIBILITY  

– Exceeds requirements on seasonal efficiency from Ecodesign regulation 2021 (EU 2016/2281) with up to 38% of energy savings and 10% in heating  

– SEER up to 5,04; SCOP up to 3,53 (3% higher than already outstanding performance of VECTIOS POWER R-410A)  

– Specific features to reduce energy consumption to the minimum for each application: variable ventilation, free-cooling, low pressure drop filters and  energy recovery systems.  

– Active Recovery and Passive Recovery on the exhaust air energy available in all capacity range  – R-454B non-depleting refrigerant with the lowest GWP (-77% lower GWP than R-410A and -31% than R-32).  

– R-454B refrigerant allows to reduce 80% the direct CO2 footprint  

– Elimination of wooden pallets for handling     

ACOUSTIC COMFORT  

– The range guarantees low noise level during operation     

DESIGN OPTIMISATION  

– Low weight and footprint  

– Aluminum panels and registers  

– 2 casing constructions: single panel as standard; and optional with double skin panel with 50mm insulation in the entire surface of the indoor section with A2-s1,d0 (M0) fire class  

– All sizes and airflow configurations can be transported in container (no need of special SEI4C maritime packaging)     

PACKAGED SYSTEM FLEXIBILITY  

– One of the longest portfolio of options  

– Perfect solution to address the most specific requirements for every application  

– Free-cooling; Energy recovery; Fresh air; Quality sensors; Filtration; Overpressure control; Heating back-up; Humidity control; All season operations;  Multi zone control; Heat recovery coil; Low temperature applications; Master/slave and back-up; Energy meters;  

-smoke detectors; Anti-corrosion options; Supervision; Communication     

EXTENSIVE SCOPE  

– Wider outside air temperature range, from -15ºC up to 48ºC  

– More applications with specific options:  Air zoning to control up to 4 zones; heat recovery coil; low return temperature 15ºC in cooling mode; air flow extension and master/slave or back-up operation management     

SIMPLICITY  

– Plug & play solution fully programmed and set-up from factory  

– Communication with all building management system protocols through  

– Modbus, Ethernet, LonWorks, BACnet and KNX  

– Wide supervision offer from 1 to 300 units  

– Remote supervision solution     

ADVANCED CONTROL VECTIC  

– Single control for the whole range  

– Dedicated to enhanced operation at part load conditions for increasing the seasonal efficiencies  

– Manages staged multi-scroll compressors and EC plug-fans  

– Improved all-seasons operation and defrosting strategies  

– Manages new options for the range  

– Multiple protocols available for BMS integration  

– Many options for remote management platforms     

FULL RELIABILITY  

– Robust design and manufacturing process  

– High quality components  

– Performance certified by Eurovent (up to 200kW)

is a new generation of rooftop air conditioning packaged units, designed to offer high levels of indoor air quality and high-efficiency as well as to reduce the total cost of ownership during its lifetime.

• Available in 12 sizes and 4 chassis 
• Cooling capacity from 100 to 280kW 
• Heating capacity from 101 to 309kW 
• Airflow from 10 800 to 54 000 m3/h

We address more applications in a wider temperature range. We provide a solution that is perfectly suited for multiple environments  

• For large areas: Choose air zoning to control up to 4 zones with high thermal dispersion 
• For industrial processes or Food Refrigeration Systems: Use rejected energy with a heat recovery coil 
• When more airflow is required: Air Flow Extensions Fulfill The Need 
• For food storage in large facilities: Low return temperature to 15°c in cooling mode    

We address multiple specific applications with one of the largest ranges of options in the market:

• Multiple Airflow Configurations 
• Free-Cooling 
• Energy Recovery : Active (with frigorific circuit) or passive with rotary wheel (sensible or hybrid) 
• Fresh Air Management 
• Quality Sensors 
• Filtration 
• Overpressure Control 
• Auxiliary Devices for Additional Heating 
• Heating back-up 
• Humidity Control 
• All Season Operations 
• Multi-zone Control 
• Heat Recovery Coil 
• Low Temperature Applications 
• Master/Slave and Back Up 
• Energy Meter 
• Refrigerant or Smoke Detector 
• Anti-Corrosion 
• Supervision 
• Communication

• Ecodesign compliant 2021 
• Indoor Air Quality 
• Optimised Cooling Circuits Design Including Tandem Compressors and Electronic Expansion Valves 
• Plug-fans (free-wheel) with EC motors 
• EC Outdoor Fans for High Efficiency and Low Noise Levels 
• Aluminium panels and registers 
• Lightweight and Dimension Optimisation 
• R-410A non-depleting refrigerant (compatible with mid-GWP refrigerants) 
• New options: Heat Recovery Coil, Low Return Temperature, Air zoning, Double skin panel 50mm in the entire indoor section

• Reduced Energy Consumption 
• Easy Installation and Integration With Building Management Systems 
• Guaranteed Easy Installation through Plug and Play Solution – Fully Programmed and Set-Up From the Factory 
• Guaranteed Low Noise Levels During Operation 
• Enhanced Solutions to Contribute to a Healthier Indoor Environment 
• High Reliability of Equipment Through a Robust Qualification Process

The VectiosTM range are compact, horizontal and autonomous air to air units, rooftop-type design. They are equipped with all the components required for the correct air conditioning to the installation.  

• RPJ series: Units for cooling operation. 
• IPJ series: Units for reversible heat pump operation.

Cooling capacity from 22 to 91 kW 

Heating capacity from 22 to 90 kW 

Air flow from 5 100 to 16 000 m3/h

The unit is connected directly to an air distribution ductwork without additional elements or equipment, pipes, cables, etc. taking up no floor space at all. This design reduces the cost of installation, facilities connections and ensures reliable operation.  

The range of capacities of these units allows for the air conditioning of medium and large surface areas used for business or industry.  

A vast number of options meet many operating requirements, such as:  

• Recovery of the extracted air energy. 
• Free-cooling. 
• Air renewal. 
• Indoor air quality control. 
• Air filtration. 
• Auxiliary devices for heating. 
• Extension of operating limits for adaptation to extreme temperatures. 

These units are equipped with electronic axial fans in the outdoor circuit, electronic plug-fans in the indoor circuit, air coils, hermetic scroll compressors and electronic control with microprocessor, optimized components for the refrigerant R-410A.  All of the units are tested and checked in the factory.

• Ecodesign compliant Lot 21 Tier 2 (2021) 
• Hermetic scroll-type compressors in tandem design 
• Plug-fans (free-wheel) with EC motors 
• Electronic Expansion Valves 
• Lightweight box for convenient installation 
• Folding hood cover for transport 
• Double wall insulated panels 
• Dual locking system of a high quality 
• Multiple recovery options on the extracted air energy 
• Removable condensates drain pan 
• Different heating backup options: electrical heaters, hot water coil, gas burner, boiler… 
• On-site easily convertible airflow (supply and return) 
• Electronic axial fans for low noise level 
• Adaptation roofcurbs for replacing units on site

• Exceeds requirements on seasonal efficiency from Ecodesign regulation EU 2016/2281 
• Active Recovery and Passive Recovery options on the exhaust air energy 
• R-410A non-depleting refrigerant 
• Elimination of wooden pallets for handling

• Single-packaged system 
• Reduces costs of transportation, installation and maintenance 
• Reduces size and weight for stacked in truck or container transportation and conveninent helicopter or crane lift 
• Assemblies conceived for new projects as well as for renovation works 
• Standard and adaptation roof-curbs are available for a number of existing models from different manufacturers 
• All the components to manage the airstream (supply, return or fresh air) are integrated in the unit 
• The unit ships fully programmed and set-up from the factory 
• Wide set of configurations and options for optimal adaptation to the installation requirements

• Robust design and manufacturing process 
• High quality components 
• Performance certified by Eurovent

• More applications with new options beyond comfort for fresh air, food retail, domestic hot water, dehumidification… 
• Wider outside air temperature range, from -15ºC up to 52ºC (cooling-only unit) 
• Outdoors ambient conditions: corrosion protection, humidity 
• Indoor Air Quality, IAQ: with a number of filtration options with fouling detection and CO2 sensors

• Single control for the whole range 
• Dedicated to enhanced operation at part load conditions for increasing the seasonal efficiencies 
• Manages staged multi-scroll compressors and EC plug-fans 
• Improved all-seasons operation and defrosting strategies 
• Manages new options for the range 
• Multiple protocols available for BMS integration 
• Many options for remote management platforms