SWIMMING POOL DEHUMIDIFICATION UNITS

---

Aquair BCP Series are dehumidifi cation units by cooling circuit, with total recuperation of the heat of condensation, especially designed for covered pools and other dehumidifi cation applications. These units have been designed for indoor installations; optionally for outdoor installations.  

onsult specific applications (marine atmospheres, high concentrations of salts or chemical agents, high temperatures, etc.)

8 models available

Water removal capacity: 4 to 15 kg/h.

Packaged AHU dehumidifies damp air in indoor swimming pool areas. May also be used for to dehumidify the air in other indoor spaces.  

Designed for installation in the space to be air conditioned.

• Packaged unit 
• Casing constructed of galvanised steel sandwich panels 
• Free-standing frame, rubber-gasketed closure panels for a tight seal 
• One air circuit 
• One refrigeration circuit, one scroll compressor, R-407C refrigerant 
• Washable regenerative filter 
• Direct expansion coil and air-cooled condenser with protective polyurethane coating 
• Brazed-plate water-cooled condenser for swimming pools: optional on small models 
• Sloped stainless steel pan 
• Centrifugal fan 
• Complete electrical cabinet, electronic control with humidity sensor and digital display 
• A wide range of options

Aquair BCP Series are dehumidifi cation units by cooling circuit, with total recuperation of the heat of condensation, especially designed for covered pools and other dehumidifi cation applications. These units have been designed for indoor installations; optionally for outdoor installations.  

onsult specific applications (marine atmospheres, high concentrations of salts or chemical agents, high temperatures, etc.)

7 models available

Water removal capacity: 22 to 74 kg/h.

Packaged AHU dehumidifies damp air in indoor swimming pool areas. May also be used for to dehumidify the air in other indoor spaces. It also heats the air and  water swimming pool as support. Designed for installation in the space to be air conditioned (outdoor installation optional).

• Packaged unit 
• Casing constructed of galvanised steel sandwich panels coated on the inside and outside with polyester paint, with glass fibre insulation of 25 mm 
• Free-standing frame, hinged doors 
• One air circuit 
• Two or three refrigerant circuits, two or three compressors, R-407C refrigerant 
• G3 regenerative filter 
• Direct expansion coil and air-cooled condenser with protective polyurethane coating 
• Brazed-plate water-cooled condenser for swimming pool water 
• Sloped stainless steel pan 
• Centrifugal fan 
• Complete electrical cabinet 
• Gesclima PRO Control by microprocessor composed by main board (CPU) and user terminal (PGD) with many functions (dehumidification , settings control, failure analysis and alarms, programmable operating times…) 
• Free cooling mixing box as option. 
• Remote condenser as option for mid seasons. 
• A wide range of options

The range of Air Master BCP Series are dehumidification units by cooling circuit, with total condensing heat recovery, specially designed for conventional covered pools and other dehumidification applications. These units have been designed for indoor or outdoor installations. Consult specific applications (marine atmospheres, high concentrations of salts or chemical agents, high temperatures, etc.).

Six models available.  Air flow rates: 4.4 to 10 m³/s  

Dehumidification capacity: 66 to 126.5 kg/h

Heating capacity: 69.5 kW to 148.7 kW  

Cooling capacity : 92.1 to 148.7 kW

Dehumidification units by cooling circuit, with total condensing heat recovery, specially designed for conventional covered pools and other dehumidification applications. These units have been designed for indoor or outdoor installations.

• Packaged unit 
• Casing constructed of galvanised steel sandwich panels coated on the inside and outside with polyester paint 
• Self-supporting frame, hinged doors 
• Three refrigerant circuits, three scroll compressors, 
• G3 regenerative filter 
• Direct expansion coil with protective polyurethane coating 
• Special brazed-plate water-cooled condenser for swimming pool water 
• Sloped stainless steel pan 
• Centrifugal fan 
• Electronic control with humidity sensor and digital display, control of different parameters, fault and alarms diagnosis and scheduling 
• A wide range of options

In the NEPTUS range of water-to-air heat pumps, water is the fluid that enables heat to be exchanged with the outdoor circuit. The unit supplies or acquires energy from the water contained in a water loop or exchanges energy with the ground (geothermal energy source).

9 models available:  

• NEPTUS RXP: cooling only version 
• NEPTUS IXP: reversible heat pump version

Cooling Capacity from 24 to 92 kW.  

Heating Capacity from 28 to 110 kW.  

Air flow rates from 4.700 to 17.000 m3/h

Compact WATER-TO-AIR units designed for heating and air conditioning new and renovated commercial buildings with water loop systems. They can be used for buildings or small commercial areas that are connected to ground loop installations (geothermal installation).  

The unit has been designed to be installed either in-store or in a technical room.

• R410A refrigerant 
• 1 refrigerant circuit 
• 1 or 2 SCROLL compressors 
• High efficiency air exchanger – fins and coil type 
• High performance plate heat exchanger 
• Centrifugal fan driven by pulleys and belts in outdoor and indoor units. 
• Mixing box for new and return air, free cooling management incorporated: High quality indoor air filtration. 
• Efficient AVANT family controller: 
• control perfectly suited to your needs with the option for communication with a BMS via an RS 485 output (several communication protocols) 
• PlantVisor PRO supervision software