ENERGY CONSERVATION & HEAT EXCHANGERS
ITEX GASKETED PLATE HEAT EXCHANGER
ITEX GASKETED PLATE HEAT EXCHANGER
ITEX GASKETED PLATE HEAT EXCHANGER
BESPOKE COILS
Description:
Each coil is tested either using an underwater air sealing test or a hydraulic test, depending on the model.This equipment complies with directive 97/23/EC.
Range:
Several models and one range available on request.
Dimensions ranging up to 2.5 × 12 m.
Use:
Circulates a fluid to warm or cool the air in commercial, industrial or healthcare facilities. May be ducted.
Features & Benefits:
- Galvanised steel frame
- Various tube and fin types available
- Connections: tapped couplings with air bleed valves or smooth tubes
- A wide range of options
CRISTOPIA ENERGY STORAGE
Description:
CRISTOPIA STL (Storage of Latent heat) technology is widely used in Europe, Asia and North America. It consists of nodules used to store the cooling energy produced by water chillers.
The energy is primarily stored at night-time, when cooling demand is lower, and redelivered during the day when greater cooling capacity is needed.
Furthermore, due to the lower temperatures when energy is stored at night, the chillers operate more efficiently. Demand on the chillers is thus better balanced between day and night, which enables the use of smaller units.
STL storage features a special control and supervision system, Cristo’Control2, which monitors the system’s performance.
Features & Benefits:
Reduce
Chiller size by 30% to 70%
The quantity of coolant
The size of cooling towers or dry coolers The subscribed demand
The floor area of technical rooms Chiller shutdown/restarts Maintenance costs
Running costs
Enhance the environmental footprint Better energy management
Smoother electrical inrush current, favouring more efficient electrical power stations Redu ced primary energy consumption (TEP)
Reduced CO2 emissions
Redu ced peak-time strain on electrical distribution networks (Controlled Electrical Demand)
Reduced coolant quantities
20% to 40% improvement of TEWI
Increase
The cooling capacity of your system
The energy efficiency of the chiller
The consistency of the electrical load profile
System yield and dependability
System service life System flexibility
Energy management
ITEX GASKETED PLATE HEAT EXCHANGER
Description:
- Stacked set of gasketed, stamped plates
- Plates compressed by bolts between fixed end and movable end
- Clipped on (plug-in) gaskets create flow channels between plates and prevent venting to the atmosphere
- Plates, gaskets and connections available in various materials
- Male threaded union, female threaded sleeve or flange
Range:
12 models available
Liquid flow rates: up to 800 m³/h
Temperatures: up to 200°C
Pressure: up to 25 bar
Range of Use:
Capacity: 5 to 5000 kW
Use:
Gasketed plate heat exchanger transfers heat between two fluids. For use in residential, commercial, industrial and healthcare applications.
Features & Benefits:
> Advantages
- Excellent transfer coefficient, reduced surface area
- Ultra-slim: takes up little space
- Easy to install
- Easy to maintain
- Very low pinch-point temperature possible
- High corrosion resistance
- Low-capacity circuits
- Plates can be added to meet changes in capacity demand
STANDARDISED COILS
Description:
- Copper, steel, stainless steel, cupro-nickel tubes
- Aluminium, pre-coated aluminium, copper fins
- Galvanised steel frame
- Connections : tapped or threaded couplings, flanges or smooth tubes
- Complies with the Pressure Equipment Directive (PED)
Range:
- BCV: Hot or cold liquid coils from the fan coil range
Air flow rate from 200 to 5000 m3/h
- BSC: Hot or cold liquid coils air flow rate 1 000 to 80 000 m3/h
- BV: Vapour coils up to 15 bars
Range of Use:
Capacity: 2 to 900 kW
Use:
The coil heats or cools air by circulating a fluid inside the tubes (vapor liquid or refrigerant). The unit can either be ducted or incorporated into a box.
Features & Benefits:
- Fixed design and dimensions
- Various models in stock
- Air flow range 200 to 80000 m3/h
- Vertical or horizontal layout